Belt Conveyor KL-600-7,0
532 000 RUB
The Conveyor consists of welded two-section frame the upper part of the frame houses master drum which is driven by engine via single throated worm gear. Slave drum is located at the bottom of the frame.
Endless belt envelopes the drums, the belt rests on the trough roller at the top and flat idler at the bottom of the frame. In working position the Conveyor rests on the rack.
Top and bottom scrapers clean the belt from mixture remains.
The Conveyor is equipped with traction electric motor connected to power cabinet with cable. The motor is enabled and disabled with corresponding buttons of control panel.
Endless belt envelopes the drums, the belt rests on the trough roller at the top and flat idler at the bottom of the frame. In working position the Conveyor rests on the rack.
Top and bottom scrapers clean the belt from mixture remains.
The Conveyor is equipped with traction electric motor connected to power cabinet with cable. The motor is enabled and disabled with corresponding buttons of control panel.
|
Technical Data |
|
| Efficiency, m3/h | 90 |
| Belt Speed m/sec | 0,6 |
| Belt Width, mm | 650 |
| Engine Rating, kW | 2,2 |
| Drum Torque, kg.•м. | 34 |
| Tractive Force, kg. | 270 |
| Drum RPM, rpm | 46 |
| Dimensions, mm: | |
| Length | 7400 |
| Width | 1100 |
| Height (transport position) | 500 |
| Weight, kg | 750 |
Conveyor is provided with 12 month warranty period and post warranty maintenance service.